NA UPIT!
Since 1982 Wharfedale Diamond has meant one thing – impeccable performance at an affordable price.
Foremost in the design criteria for Diamond 200 is the ongoing research into loudspeaker driver sound quality. The speaker series uses Warfedlale's famous woven Kevlar cone form, drawing influence from the flagship Jade Series.
While honing the internal crossover and using stronger magnets on the rear of the Diamond 220 for example, aesthetics and construction have been improved too. The Diamond 200 Series benefits from an all new lacquered front baffle and cosmetically enhanced veneers.
Wharfedale’s famous Diamond speakers have served as the classic entry point to true high-fidelity sound, their exceptional value for money earning dozens of awards around the globe. Now with the introduction of the Diamond 225, Wharfedale has once again raised the bar for affordable, high-performance loudspeakers.
A unique cabinet construction - A sandwich of particleboard between MDF, which has enabled improvements both aesthetic and sonic.
New lacquered baffle design further enhances aesthetics
A bass motor system with larger magnets makes the speakers easier to drive and boosts transient acoustic power
Enhanced ‘Slot-loaded distributed Port’ - for lower turbulence and there for low frequency distortion
Upgraded crossover networks
Spec:
Configuration |
2.5-Way Floorstander |
Enclosure Type |
Bass Reflex |
Transducer Complement |
2-way |
Bass Driver |
165mm Woven Kevlar Cone |
Treble Driver |
25mm Soft Dome |
AV Shield |
No |
Sensitivity (2.83V @ 1m) |
87dB |
Recommended Amplifier Power |
25-120W |
Peak SPL |
96dB |
Nominal Impedance |
8Ω Compatible |
Minimum Impedance |
4.2Ω |
Frequency Response (+/-3dB) |
45Hz ~ 20kHz |
Bass Extension (-6dB) |
40Hz |
Crossover Frequency |
2.3kHz |
Cabinet Volume (in litres) |
10.3L |
Dimensions (mm) |
355mm x 196mm x (262+28)mm |
Colour |
Black |
Net Weight |
6.5kg/pcs |
Gross Weight |
15.2kg/ctn |