CMX 20 T W/BL/SLV

The APart CMX20T 2-way built-in loudspeaker has an exceptional high quality and very good bass response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CMX20T is equipped with a high-quality 20 watt 100 Volt transformer with several power tappings.

The loudspeaker has an 8” enforced polypropylen woofer and 1” tweeter. Due to this enforced woofer, the loudspeaker has a very low distortion! It makes the CMX20T very suitable for the distribution of microphone calls and backgroundmusic at a higher volume level.

The housing is made of high quality ABS. The woofer is made out of enforced polypropylen with a rubber edge, what makes it moisture-proof.

The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden behind the loudspeaker grill, which gives the loudspeaker a modern and striking design).

The standard colour is white. From 12 pieces on, the loudspeakers can be painted optionally in any other RAL colour (Ref; PAINT-CM).

• Type : 2-way HiFi Pro
• Woofer : 8" enforced PP, rubber edge
• Tweeter : 1" silk dome
• Impedance : 16ohm / 100Volt
• Transfo Power Tappings: 2,5 - 5 - 10 - 20 Watts
• RMS Power 16ohm
• AES Rated: 60 Watts
• Music - Program: 100 Watts
• RMS Power 100Volt
• AES Rated: 20 Watts
• Music - Program: 32 Watts
• SPL 1w/1m: 93 dB
• SPL Max peak: 110 dB
• Frequency Range : 50 Hz - 20 kHz
• Dispersion:
• @ 1 KHz: 180°
• @ 4 kHz: 80°
• @ 8 kHz: 45°
• IP rating : 54
• Dimensions :
• Cut out: 220 mm
• Outside: 244 mm
• Depth: 90 mm
• Weight : 1.4 Kg